Not only careful communication is essential, but we would greatly recommend, when you pick out your type and brand of paint that you go and pay for it, with the contractor's discount, which is given by Sherwin-Williams and most paint companies. Then you will know how much paint you purchased and the coverage. If it is possible, inspect the work of the painter daily.
DON"T EVER PAINT THE WALLS TO FRESHEN UP YOUR HOME & NEGLECT THE TRIM, MOULDING & DOORS DO NOT HIRE PEOPLE BASED ON THEIR WORD ALONE, IN THESE TIMES IT IS NOT ENOUGH. DON'T AGREE TO PAY HOURLY NOR HALF UPFRONT...FOR PAINT ETC..LOL OR THEY MAY NEVER SHOW UP AGAIN. IF A COMPANY ASK HOW MANY EMPLOYESS WILL BE PAINTING THE HOUSE SO YOU CAN GET A MORE ACCURATE TIME FRAME TO COMPLETE JOB. NOW I NEED TO HIRE SOMEONE TO CLEAN UP A FRIEND OF A FRIEND'S MESS WORK WAS SUBPAR. ALWAYS ASK TO SEE LICENSE AS ALOT OF THOSE I INTERVIEWED CLAIMED ON THE PHONE TO HAVE JUST SO THEY COULD CHARGE MORE, & GAIN ACCESS . THEN THE SALEMAN SIDE COMES OUT. WHEN QUESTIONED FOR PROOF THEY THEN WANT TO NEGIOTATE PRICE. ASK IF RECALKING THE WINDOWS IS INCLUDED IN PRICE...
I totally agree with this as well. I think every time I have read Angie's List reports, they are inaccurate and not researched enough. I had COMPLETE faith in Angie but lately I am hesitate on reports. I would check your local hardware store or even your neighbors to get a recommendation for painters. If you liked what you saw, you can be stress free with your results. I live in Texas and I have borrowed my hardware store opinion bc that seems to be the place most of the contractors or painters come to buy stuff for the jobs. If your neighbors painters, contractors, electricians and plumbers have shown good results, stress free you. I have been stress free with results, glad I asked for other opinions.Don't forget, the Hardware Store knows if that person is trustworthy and honest, their accounts would be shut down.
Generally, it will take a minimum of two gallons of paint to cover a room. At the highest end, paint will cost anywhere between $30 and $60 per gallon and come in three different finishes: flat, semi-gloss or high-gloss. Flat finishes are the least shiny and are best suited for areas requiring frequent cleaning. Semi-gloss finishes are a bit shiny but can also be easily cleaned. A high-gloss finish is stain-resistant and easy to clean. Traditionally, living rooms should be painted with a flat finish to allow the paint to stand out. Glossy finishes should be reserved for hallways, and a semi-gloss is best suited for trim. Invest in pre-primed paint whenever possible. This cuts down on time by combining the layering process. Almost any paint job will require a primer, which will cost anywhere from $7 to $15 per can. Primer helps the paint to stand out against the underlayer of paint it's covering, especially if the new paint is lighter than the old coat. You will need at least two cans of primer, if not more, to cover one wall. Here are some paint brands and their average price per gallon:

Hi Elaine, We would be happy to get you connected with a painting and wallpaper pro. You can submit a service request on our website: http://www.homeadvisor.com/ or browse reviews for local pros here: http://www.homeadvisor.com/c.html. We can also have a project advisor reach out to assist you if you send your contact information to [email protected] –HASupport
In Mark Twain's classic "The Adventures of Tom Sawyer," Tom tricks his friends into painting his aunt's fence. You probably won't get that lucky, but there are good reasons many homeowners keep their painting in-house. No building codes apply to interior decoration; if you do something dumb, you don't risk life and property as you would if you were, say, tackling a rewiring job; and because labor typically accounts for 80 to 85 percent of the price of a paint job, you'll save a ton by doing the work yourself.

As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements.


Contractors apply several layers of paint to achieve a suitable finish. They leave the first coat to dry for the recommended time and apply one or more finishing coats. They might choose paints with special qualities for different types of room. Manufacturers have developed paints for bathrooms or kitchens that have good resistance to moisture for example. When they have completed painting, they clear away any equipment and restore the area to its original condition.

Take and pass your contractor’s certification exam. Like the licensing requirements, the content and format of the exam will vary depending on your location. However, the test will almost always include a comprehensive written section, on top of which you may be asked to describe or demonstrate key skills. Upon passing your exam, you’ll have between 1 and 4 years to complete the process of formally registering your business.[11]
I was taught to paint by a professional and when estimating the amount of paint needed, I always allow for a second coat just to make sure of coverage. We interviewed a painter who tried to tell me I bought poor quality paint without knowing where I purchased it, and stated he would have to buy all new paint. He had not seen the cans and was just guessing so I asked him where I should buy paint from now on. It was the same place I had purchased my paint and he wanted to charge me an extra 20 a gallon more than what I paid for. Needless to say, I have interviewed numerous painters and they are not all honest.
Load flat or eggshell exterior paint color into paint sprayer. Depending on intensity of hue, apply one or two coats of flat or eggshell exterior paint to entire house. Be sure to work your way from top to bottom in a smooth, controlled manner, overlapping each stroke by 8 inches. TIP: When changing exterior color from light to dark or dark to light, start with a coat of primer to ensure proper coverage. Primer is not necessary when a fresh coat of existing color is being applied.
One of the fastest, most effective ways to personalize your living space is with color. Bright, muted, cheerful, elegant—whatever your mood, personality, or preference might be, there’s a paint color to match! Our local Five Star Painting teams specialize in making houses feel like homes through interior and exterior home painting services. If you're looking to transform your home, it's time to contact Five Star Painting. Call (888) 261-3633 for a free estimate, or schedule an appointment online. Let us help you paint your world!
Hi Elaine, We would be happy to get you connected with a painting and wallpaper pro. You can submit a service request on our website: http://www.homeadvisor.com/ or browse reviews for local pros here: http://www.homeadvisor.com/c.html. We can also have a project advisor reach out to assist you if you send your contact information to [email protected] –HASupport
This feared question gets to the heart of who will be performing work in your home and whether your home and belongings will be safe. Sadly, there have been numerous documented cases around the country where employees of a hired contractor have burglarized, injured, or even killed the homeowner.  What’s worse, in most cases it was later found that the bad employee had a criminal background that was unknown to the employer.  In learning about who will be performing the work in your home, you should ask additional questions about their hiring policy and whether they conduct criminal background checks.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
Spills and spatters happen, regardless of how careful you are. It’s a lot easier to pre- pare for them than to wipe them out of your carpeting or off your wood floor later. All it takes is canvas drop cloths in your work area (a 4-ft. x 15-ft. cloth costs $15). The thick canvas stays in place, so you don’t need to tape it, and you can use it to cover any surface. Plastic drop cloths are slippery to walk on or set a ladder on and don’t stay in place. Even worse, paint spills on plastic stay wet, and they can end up on your shoes and get tracked through the house. Canvas is slippery on hard floors, so rosin paper ($10 for 400 sq. ft. at home centers) is better over vinyl, tile and hard- wood. Tape the sheets together and to the floor to provide a nonslip surface.
Even if you go it alone, specialize to keep your initial investment low. If you do only interior painting, for example, you might get by with one ladder, a few brushes, rollers, basic hand tools and such, for an investment of less than $300. Again, you can add to your tools as you need to (every job is a bit different), and parlay profits into the equipment necessary for exterior painting or working on large commercial properties.

House Painters paint customers' homes using brushes, rollers, and spray guns. They may also remove old paint in an effort to prepare surfaces for being painted. Sample resumes for this position indicate skills like budgeting projects with the painting crew, and prepping and repainting houses while on a strict schedule. House Painters can enter the field with or without a high school diploma on their resumes. Some receive training on the job, while others complete educational programs that combine hands-on experience with academic study.


Before we start, you will have to choose your color. If you would like to replicate a color already on your wall, you can use an old can of paint for reference, or you can take a chip to the paint store. We can help you identify the color, the finish, and type of paint with our visualizer tools, and we also offer a Color Consulting Service if you need help coming to a decision.


A good paintbrush is key to a professional-looking finish. "A quality brush costs $15 to $25, but you'll discover that pros aren't as talented as you thought," says Doherty. "The equipment has a lot to do with their success." Most of our pros prefer natural-bristle brushes for oil-based paints, but they recommend synthetics for all-around use. When choosing a brush, pay attention to the bristles. Synthetic brushes are made of nylon or polyester, or a combination of the two. Poly bristles are stiffer, which makes them good for exterior or textured work, but for fine interior work, Doherty uses softer nylon brushes. Look also for tapered bristles, which can help you work to an edge, and flagged tips, which help spread the finish smoothly and evenly. Brushes are available in 1- to 4-inch widths. Most painters keep an arsenal on hand to match the job. "Use common sense," says Maceyunas. "A smaller brush gives you more control, but no one wants to paint a door with a 1-inch-wide brush." Doherty recommends starting with a 2- or 2-1/2-inch sash brush. The angled brush makes it easier to cut to a line and puts more bristles on the work than a square-tipped brush.

You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.
As you walk through your lighted rooms (preferably day light) see if the new coat has light spots showing the precious paint. This is call "bleeding through". This means that there's only one coat of paint or the paint was diluted or the trasition of colors were from light to dark (or the other way around) and primer was not use or the painter is inexperienced.
As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements.
More recently, professional painters are responsible for all preparation prior to painting. All scraping, sanding, wallpaper removal, caulking, drywall or wood repair, patching, stain removal, filling nail holes or any defects with plaster or putty, cleaning, taping, preparation and priming are considered to be done by the professional contracted painter.
Primers aren't just diluted paint. They're formulated to establish a solid, even base, seal stains and ensure that the topcoats of paint go on smoothly and bond securely to the surface. "Most homeowners use latex primers, but the pros stick to alcohol and alkyd primers because they'll cover almost anything," says John Weeks, of John the Painter in Mobile, Alabama. Primer can affect the appearance of the topcoat. "It's okay to spot-prime the ceilings but not the walls, because primed spots will show," adds Span.
As you walk through your lighted rooms (preferably day light) see if the new coat has light spots showing the precious paint. This is call "bleeding through". This means that there's only one coat of paint or the paint was diluted or the trasition of colors were from light to dark (or the other way around) and primer was not use or the painter is inexperienced.
Pros prefer 5-gallon buckets with a roller grid to roller pans. They hold more paint than pans and, says Doherty, "It's tougher to tip over a bucket." A bucket also lets you box, or mix, two or three cans of paint to avoid color discrepancies. To use a bucket and grid, dip the roller a quarter of the way into the paint and run it over the ramp to work the paint into the nap.

Most interior painting projects will present corners and edges. Corners, trims, splashes and accents will require cutting in — which generally requires the most patience, preparation and skill. There is a lot of debate among painters whether it is better to cut in before or after applying the roller. Solo painters may want to prepare the surfaces first, apply painter’s tape where required and cut in before applying paint to the rollers. Painters working in teams can split cutting in duties in sections while other team members are applying paint with rollers.
×