It is one of our core values to ensure our clients’ dreams for their home comes true. So often, clients come to us for a new coat of paint or a repair but what they really want is so much more. We understand your house is your home and that when it is time for change or for a repair, you want a crew that will take care to make your home look its best.

Home Painter Co


Acquire liability insurance. In the event of accident, injury or property damage, liability insurance will protect you from having your assets seized. Look into a few different providers to compare rates and see what sort of coverage they offer. Good insurance is absolutely critical for small business owners, who stand to lose a lot more should something go wrong.[15]
Most painters have no problem painting doors in place, but they recommend you lay the door on sawhorses and work horizontally. If you have a paneled door, start with the panels and work from the outside edges in toward the center. "Watch the corners — paint loves to puddle," warns Dixon. While the paint is still wet, lightly "tip off" the panel with an almost dry brush. (Tipping off is pulling the brush over the surface to level out the finish.) When painting the stiles (vertical) and rails (horizontal) just follow the grain of the wood. When the grain changes abruptly, for instance, where the rail meets the stile, don't stop your brush stroke — you'll only leave a lump of paint. Apply paint across the joint with a full stroke, and then tip off the overlapping section by pulling the brush in the direction of the grain. "Make sure the door is dry before painting the opposite side or rehanging it," says Maceyunas.
"Modern paints dry too quickly, and are difficult to brush out," says Dixon, who uses paint additives, such as Floetrol for latex paints and Penetrol for alkyds. "Adding a few ounces per gallon slows drying time and makes the paint more workable," he says. Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) Although there are mildewcide additives, our pros prefer using bathroom and kitchen paints that have built-in mildew fighters. "These paints will prevent mildew from forming, but they won't kill mildew that's already there," Dixon points out. Because leftover mold spores can live beneath the paint and eventually work their way through to the surface, you should also prep bath and kitchen surfaces. First, wash down the walls with a bleach solution (3/4 cup of bleach per gallon of water) then seal with a stain-blocking primer, such as Zinsser's Bulls Eye 1-2-3 or Kilz's Total One.
Hi Richard, Thanks for reaching out. Please visit our website to browse pro reviews in those areas or submit a service request http://www.homeadvisor.com/c.html. If you would like to speak w/ a rep about your project and get assistance finding the right pro in these areas please send your contact info to [email protected] and someone will reach out. -HASupport

Paint Contractor

×