Only a dummy gets involved with so-called "contractors." Hire a qualified actual worker yourself. Check out their resume/background, etc. RULE #1..NO ADVANCE DEPOSITS! Pay daily or weekly or upon satisfied completion according your standard, not workers. Contractors are merely employment agents. If that's the way you get work done, then go ahead and waste your money and wind up with the myriad of problems enumerated upon in the news clip above. RULE#2.. NO SMOKERS. They are lighting up on your money. RULE#3: No cell phones while working. Talk on their own time after work
With that said, here's the reality of that particular scenario. Painters do put water in the paint, but not for reasons you would think. Some materials need to have their viscosity manipulated in order to slow drying time, allowing gravity to 'smooth' out the product for a better finish. It also prevents 'drags' and 'sausages'. I personally try not to do it too often, but from time to time I have to. I want my client to have a proper finish.
The pros were split on this tip. "Masking tape is problematic," says Mark Dixon, a painter in Missoula, Montana, and author of "House Painting Inside and Out" (Taunton Press, 1997). "Paint can bleed behind the tape, or remove the paint it's stuck to." Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) On the other hand, "If you can't cut in, you can't beat tape," says Span. The pros we spoke with all recommend painter's (blue) tape because it's easier to remove than masking tape. To prevent bleeding, Span uses a putty knife to bed the tape. After letting the paint dry, he scores the edge of the tape line with a utility knife to avoid tearing the paint.
I used to work at Sherwin Williams. The best thing to do is specify that you will purchase your own paint. If the painter objects strenuously, he was plaanning on making money in the ways this article outlines. You might pay a few dollars more for paint, but you will have control of the quality of what goes on your walls. Never skimp on paint quality.
Repaint — exteriors especially — before visible signs of wear appear, Bancroft says. Don’t wait until you see peeling or flaking paint. “If I have to spend 40 hours preparing the surface before we can paint, that time is going to result in a lot of extra costs. But if I can spend 10 hours preparing the surfaces to be painted, you’re going to save money,” Freeman says.
In general, glossier paints are more stain-resistant and scrubbable. But a higher sheen also highlights any imperfections in the wall or in the paint job. "Flat paints are fine for ceilings and formal rooms, but for most of my customers, I recommend an eggshell gloss. It's good for hallways, kids' rooms, even kitchens and baths," says Toto. It seems that latex paints have won over even the most finicky painters. "Though we still use oil-based paints for restor-ation work, latex paints are fine for interior walls and new trim," says Toto, "as long as you don't go cheap on the paint." All of our pros have their personal favorites, but they agree that good paint does not come cheap. "You'll spend $20 to $35 per gallon for a top-shelf paint," says Weeks. The pros also agreed that using two coats of paint will result in the best-looking job. Don't skimp on the coverage; if you're covering more than 400 square feet per gallon, you're spreading it too thin. Also, keep 1/4 to 1/2 gallon on hand for touch-ups.
Visit my Paint Life Tool Store. A large majority of the tools I use and are seen in my video are also available in my tool store. Only tools and products I use and would recommend are available in my tool stores. You can visit my Paint Life tool store and purchase tools by clicking here. Paint Life Tools are game changing tools that help increase production, profits, and make your painting team more efficient. We have tools to remove paint runs, control overspray, make scraping fun, and increase your speed cutting in. Our store includes our very own PAINT LIFE paint wear clothing, stickers, hats, jewelry, and more. Visit our store and purchase tools and gifts for work, presents, or to simply support our efforts to provide FREE painting advice worldwide.
I agree with JHs. If there is no new color on it at all, just talk to the painter about it, if it was an honest mistake (which can happen very easily while painting) your painter should have no problem fixing it. However, in my years of experience, it is not unusual for 2 coats of door paint (good quality) not to cover very well at all. I once painted a red door 7 times, plus a tinted prime coat before I found the door to be a solid color.
Second coats on similar colors are almost never recogicnized as being needed until the coat is applied and has dried. ONLY THEN WILL YOU SEE WHETHER IT NEEDS A SECOND COAT or not. Yes, painters can use a cheaper paint then what you paid for. That is solved by getting your own which, I would charge extra for because I will always have to go get more, or add second coat because home owner tried to skimp on paint, or they got the wrong color etc...
The obvious trick here is for unaffiliated contractors to use the BBB, PDCA, Chamber or other organizations’ logos without being a member. Other tricks include claiming membership when that membership has expired or even make up fake organizations that sound good. The BBB continuously goes after unscrupulous companies that attempt to trick customers into thinking they are members. Nearly every organization has a web page these days; if you suspect something, do a little searching to find out the truth.